Bevel Head Skew Rotator Delta

Plasma bevel unit

The Skew Rotator Delta provides the option of bevel cutting up to 400 amps for users in the mid to large-size gantry machine market, providing a wider range of options to better suit your needs.

More users than ever before can utilise bevel cutting to create the finished parts they need. The compound skew design utilised in the Skew Rotator Delta keeps the critical components up and away from the cutting torch, minimizing the risk of damage to the torch by slag, heat, and collision. This design concept has been proven by the Skew Rotator Infinity in many rigorous applications.

It is capable of cutting accurate bevel profiles on any angle from +45° to -45°, and it is controlled automatically by the Global ControlPlus. Rotation of +/- 460° takes place at a rate of up to 50 RPM, for efficient use of machine on time. Torch height is controlled automatically with analogue arc voltage to an accuracy of +/-0.15 mm, so part accuracy is maintained throughout the cut. Corner loop size down to 10 mm can be achieved without requiring start/stop commands. The Skew Rotator Delta can be used on a variety of machines.

  • Based on the most successful plasma bevel cutting head ever
  • Compact design gives maximum effective working width
  • Lightweight design for good dynamic performance
  • C-Axis Rotation +/- 460°
  • Bevel cutting from +45° to -45°

Contact

Messer Cutting Systems do Brasil Ltda.


Av. Juvenal Arantes, 2500
Condomínio Industrial Bracaiúva
Medeiros - Jundiaí/SP
Brasil
CEP 13212-354

+55 (11) 4525 6680
e-mail

Rua Frei Pacífico, 71
Bairro São José

Caxias do Sul - RS
Brasil
CEP 95032-380